300/200W HV CO2 laser power supplyo for folded CO2 tube, power supply for 200/300Watt CO2 laser tube for knife die cutter

rubylasertech

ZS-300W CO2 laser power supply

Feature:

1. It has excellent protection function: the 300W laser power supply has open circuit protection, which allows the high-voltage laser power supply works in an open circuit state for a short time, thereby avoiding damage to the CO2 laser tube.
2. The laser powersupply's control is simple. And the 300W laser power supply can use 0-5V analog signals or PWM signals for laser power control.
3.300W laser power supply uses ordinary H/L/P/G/IN/5V ports to receive control signals.
4. The 300W laser power supply has stable performance: each laser power supply has undergone multiple testing procedures and 24-hour aging at high temperature (52-55 degrees Celsius) under full load, ensuring the stability of each CO2 laser power supply.
5. The 300W laser power supply has good compatibility: This high-voltage laser power supply can drive foldedCO2 300W laser tubes such as RECI, SLW, Yongli, SPT, etc In addition to this function, the high-voltage laser power supply also has strong functional adaptability, fast response speed, and good cutting effect.
6. The 300W laser power supply is easy to control: it uses high or low level for control. Using TTL level control, it can achieve fast start and stop. At the same time, the high-voltage laser power supply is equipped with a protective switch, which is tested through external water and ventilation
7. It uses the latest silicon carbide to replace traditional transistors. Silicon carbide has high efficiency, low heat generation, and low failure rate. This makes the laser power supply more suitable for long-time uninterrupted running in high temperature environments without any malfunctions.
8. Silicon carbide reduces circuits's quantity, which reduce failure rate and keep consistency in output parameters. It improves high-power cutting effect of CO2 laser cutting machine
9. It adopts surface mount assembly technology, fully automated and standardized production lines.Besides,,it also uses high-definition cameras to detect circuit boards, assembly components, and soldering effects. These three methods reduce the unqualified power supply's possibility caused by human error.
10. It uses silicone tubing to wrap the output high-voltage cable, which prevents electric sparks from splashing. It can protects operators and equipment and enable the laser power supply works normally in humid environments
11.90-270V voltage regulator is optional.
12.The 450/600/750W CO2 laser power supply can be customized on client's requirement.



00 wire connection.jpg

Specification：

lnput

Input voltage

AC90-250V±10%

AC frequency

47~440HZ

Maximum input power

1000W

Maximum input current

10A

Output

Maximum output voltage

50KV

Maximum output current

45mA

(depending on the laser tubes of different manufacturers)

Efficiency

More than 90% (Full load)

Response speed

Not more than 1ms

Control lnterace

TTL multilevel switching control,effective level can be high and low selection (see control wining diagram)

Insulation

lnput-output

AC 1500V 1 minutes not more than 10mA

lnput-shell

AC 1500V 1 minutes not more than10mA

Output-shell

Connection

Open Circuit Protection

Can be short circuit (requires a good grounding shell,while avoiding the positive electrode and the shell between the arc)

Environmental Requested

Working temperature

-10℃~50℃

Storage of temperature

-20℃~75℃

Relative Humidity

Maximum 85%RH (non-condensing)

Altitude

100,000 feet of work

200,000 feet of storage,dose not work

Cooling methods

Forced air cooling (fan cooling)

Dimensions (LxWxH)

356mmx165mmx133mm