RUBYLASER 40W HV CO2 laser power source for 800/700mm CO2 laser tube

rubylasertech

ZS-40WB CO2 laser power supply

Feature:

1.Application: Acrylic sculpture, cut; Fabric sculpture, cut; Rubber sheet sculpture, cut, etc.

2.Easy control of laser power: Both 0-5V analog signal and PWM signal can be used to control laser power output.

3.Good compatibility:This 40W CO2 laser power supply is special designed for most brand 700mm,800mm or 850mm 30W /40watt CO2 laser tube. It mainly is used on mini laser carving stamp machine or laser engraver machine.

4.Fast response speed and effect.

5.Easy Control: The start and stop of laser power can be easily controlled by TTL level. And it has protection switch to test the external water status, ventilation, etc.

6.This CO2 laser power supply can take feedback interface which can be used in closed-loop control and testing the working current of laser power..

7.The 40watt laser power supply has open circuit protection: Under the condition of good protective earth, this 40W CO2 power supply ’can work in open-circuit for a short time, which can protect power supply from damage. It can extend power supply’s service time.

8.Dramatically lengthen the life time of sealed glass type CO2 laser.tube

9. This ZS-40W CO2 power supply adopts ordinary H/L/P/G/IN/5V for control signal output and uses blue blue aluminum case.


10. It uses the latest silicon carbide to replaces traditional transistors. The silicom carbide has high efficiency, low heat generation and low failure rate characteristics.Which make laser power supply more suitable for long-time uninterrupted works in hot environment.
11.The silicon carbide reduces circuit's quantity, which reduces failure rate and keep consistency in output parameters. Enable laser power supply have better engraving and cutting effects
12. It adopts patch assembly process, which is fully automated and standardized It uses HD cameras to detect circuit boards, assembled components and soldering effects. The two methods reduces the possibility of human error causing unqualified laser power supply.
13. It adopts silicone tube to wrap output HV cable to prevent electric sparks from splashing and protect operators and equipment, which allowing laser power supply work normally in humid environments
14. 90-270V Voltage stabilizer is optional.



00 wire connection.jpg

Specification:

Item

40W laser power supply

Input

Input voltage

AC110/220V ±10%

AC frequency

47-440Hz

Max input power

350W

Max input current

3A

Output

Max output voltage

DC25KV

Max output current

DC20mA(it depends on different brand 40watt CO2 laser tube)

Efficiency

More than 90%(full load)


MTBF

More than 10000 hours

Response speed

1ms(Time is from TTL.Signal is given to the output current up to 90% of pre-setting current)

Withstand voltage

Input-output,input-enclosure, AC1500V,10mA 60S, Output cathode is connected with enclosure.

Environment

Operation temperature(-10-40 degree celsius), related humidity s less than 90%


Cooling

Force air cooling

Environment related

Working temperature

-20℃---50℃

Storage temperature

-10℃---75℃

Related humidity

Max 85^ RH(non-condensing)

Cooling method

Force air cooling(FAC)

Altitude

100000feet of work,200000 feel of storage,no work.

Cooling method

Air force cooling(Fan cooling)

Dimension

LxWxH=142X145X60mm

Weight

1KG